Catégories
- Nouvelles (124)
- Soutien (120)
- OEM & ODM (8)
- Conducteurs (6)
- Instructions (17)
- SDKs & Outils (5)
- Connaissance (31)
- Solutions (9)
Lorsque la machine POS n'est pas utilisée pendant une longue période, il doit être stocké dans un environnement sec et sombre. Un environnement humide provoquera l'oxydation des composants électroniques, et une température élevée et une exposition au soleil endommageront l'écran LCD et d'autres composants. If you find that the POS machine that has been stored for a long time cannot be turned on, please follow the steps below to troubleshoot.
1,The usage environment of the POS machine, such as power input, power output, temperature, humidity and so on, check these basic requirements are right or not, or the power adapter indicator is normal or not, check whether the POS machine has a self-checking sound while booting up.
2, RAM oxidation: If the memory of the POS machine was oxidized, resulting in poor contact between the RAM and the memory slot, it will cause the POS machine can not turn on after a period of use. Usually you can hear 3-4 error beeps when booting up. You can deal with it this way: Firstly shut down the POS machine, remove the RAM from the motherboard, then use an eraser to wipe the gold finger (the place with the copper sheet), then blow the dust off, insert it back into the slot, and boot in the POS machine again.
3, Motherboard: If the mainboard was failure, it also made the POS machine can not turn on after a period of use. The structure of the motherboard is complicated, it is not recommended to disassemble it without a professional engineer or please contact Sunany support team to help you.