Q: How does an i-button work?
A: An i-button reader contains an intensive strong magnet that generates a magnetic ring. When an electronic key with a hoop is brought near the reader, it is adsorbed onto the reader by the magnet. At the same time, the gilt spring contact on the reader is turned, enabling the ID information on the electronic key to be read. This ID data is then used by the cashier system to perform time operations. The electronic key can be fixed on the reader, and once it is removed, the machine sends a signal to the master and locks it. This feature is used for operation and control of the cashier system.
Q: Is it necessary to install a driver to use the R1 RFID reader?
A: No, it is not necessary to install a driver. The R1 RFID card reader communicates with the POS machine via the USB interface. Once it reads the first 10 digits of the card number, it simulates a keyboard to input the card number and press "Enter". You can simply call the data in the secondary development without any additional driver installation.
Q: What types of barcodes can the S1 2D barcode scanner in Easy device read?
A: The S1 2D barcode scanner can read most standard one-dimensional and two-dimensional barcodes in the market, as well as barcodes displayed on screens.
Q: Do you offer IPS second displays?
A: We offer 7'' and 10.1'' second displays that use IPS screens. The resolution of the 7'' display is 1024*600 pixels, while the resolution of the 10.1'' display is 1280*800 pixels.
Q: Can you recommend a POS machine model that has 6 COM ports?
A: Z200-R model is a great fit for you as it comes equipped with 6 COM ports, a 15-inch main display with capacitive 10-point touch panel.
Q: What sizes of touch screen monitors do you offer?
A: We offer touch screen monitors in sizes of 9.7 inch, 15 inch, and 17.3 inch.
